Ford 2011 Fusion Hybrid Page 220 Owner'S Manual Download

Page: 220 / 345

Parking brake

To set the parking brake (1), pull
the parking brake handle up as far
as possible.

The BRAKE warning lamp will
illuminate and will remain
illuminated until the parking brake
is released.

To release, press and hold the button (2), pull the handle up slightly,
then push the handle down.

WARNING:

Always set the parking brake fully and make sure

that the gearshift is securely latched in P (Park).

WARNING:

If the parking brake is fully released, but the brake

warning lamp remains illuminated, the brakes may not be

working properly. See your authorized dealer as soon as possible.

ADVANCETRAC

姞

STABILITY ENHANCEMENT SYSTEM

Your vehicle is equipped with the AdvanceTrac

威

system. The

AdvanceTrac

威

system provides the following stability enhancement

features for certain driving situations:

•

Traction control system (TCS), which functions to help avoid
drive-wheel spin and loss of traction.

•

Electronic stability control (ESC), which functions to help avoid skids
or lateral slides

BRAKE

Driving

220

2011 Fusion Hybrid

(hfv)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Fusion Hybrid


























































































































































































































































































































































Search results

Summary of Contents for 2011 Fusion Hybrid

Reviews:

Related manuals for 2011 Fusion Hybrid

Brands by name

Popular brands

Ford 2011 Fusion Hybrid, Owner'S Manual

Search results

Summary of Contents for 2011 Fusion Hybrid

Reviews:

Related manuals for 2011 Fusion Hybrid

Brands by name

Popular brands