Ford 2010 Mountaineer Page 119 Owner'S Manual Download

Page: 119 / 390

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.

1. Press the ON control and release
it.

2. Accelerate to the desired speed.

3. Press the SET + control and
release it.

4. Take your foot off the accelerator
pedal.

5. The indicator light

on the

instrument cluster will turn on.

Note:

•

Vehicle speed may vary momentarily when driving up and down a
steep hill.

•

If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.

•

If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.

Driver Controls

119

2010 Mountaineer

(mnt)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Mountaineer







































































































































































































































































































































































































Search results

Summary of Contents for 2010 Mountaineer

Reviews:

Related manuals for 2010 Mountaineer

Brands by name

Popular brands

Ford 2010 Mountaineer, Owner'S Manual

Search results

Summary of Contents for 2010 Mountaineer

Reviews:

Related manuals for 2010 Mountaineer

Brands by name

Popular brands