POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)
The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P (Park) position.
Press and hold the rocker control to
adjust accelerator and brake pedal
toward you or away from you.
WARNING:
Never adjust the accelerator and brake pedal with
feet on the pedals while the vehicle is moving.
POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED)
Deployable running boards (DRB) automatically move when the doors
are opened to assist entering and exiting the vehicle.
Automatic power deploy:
•
The running boards will extend
down and out when the doors are
opened.
Automatic power stow:
•
The running boards will return to
the stowed position when the
doors are closed. There will be a
two second delay before the
running boards move in to the
stowed position.
Manual power deploy:
To manually operate the running boards, refer to
Message center
in the
Instrument Cluster
chapter.
•
This feature can manually set the running boards in the deployed
(OUT) position for access to the roof.
•
When running boards are manually set in the deployed position, the
boards will return to the stowed position and enter automatic mode
when the vehicle speed exceeds 5 mph (8 km/h).
Enable/disable:
To enable/disable the power running board feature, refer to
Message
center
in the
Instrument Cluster
chapter.
Driver Controls
117
2010 Mountaineer
(mnt)
Owners Guide
(own2002)
, 1st Printing
USA
(fus)
Summary of Contents for 2010 Mountaineer
Page 383: ...Ford Extended Service Plan 383 ...
