Increasing speed while using speed control
There are three ways to set a higher
speed:
•
Press and hold the SET + control
until you get to the desired
speed, then release the control.
•
Press and release the SET +
control to operate the Tap-Up
function. Each tap will increase
the set speed by 1 mph
(1.6 km/h).
•
Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.
Reducing speed while using speed control
There are three ways to reduce a
set speed:
•
Press and hold the SET- control
until you get to the desired
speed, then release the control.
•
Press and release the SET-
control to operate the Tap-Down
function. Each tap will decrease
the set speed by 1 mph
(1.6 km/h).
•
Press the brake pedal or the clutch pedal (if equipped) until the
desired vehicle speed is reached and press the SET + control.
Turning off speed control
There are two ways to turn off the
speed control:
•
Press the OFF control.
•
Turn off the ignition.
Note:
When you turn off the speed
control or the ignition, your speed
control set speed memory is erased.
OFF ON
SET
SET
RES
Driver Controls
76
2010 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
