TO EXIT 4X4 LOW STOP VEHICLE(if equipped)
— Displayed when
2WD is selected while the vehicle is operating in 4X4 LOW. For more
information, refer to
Control Trac four-wheel drive (4x4) operation
in
the
Driving
chapter.
TO EXIT 4X4 LOW SHIFT TO N(if equipped)
— Displayed when
2WD is selected while the vehicle has been stopped in 4X4 LOW. For
more information, refer to
Control Trac four-wheel drive (4x4)
operation
in the
Driving
chapter.
POSITIVE RETENTION FLOOR MAT (IF EQUIPPED)
WARNING:
Do not install additional floor mats on top of the
factory installed floor mats as they may interfere with the
accelerator or the brake pedals.
Position the floor mat so that the
eyelet is over the pointed end of the
retention post and rotate forward to
lock in. Make sure that the mat does
not interfere with the operation of
the accelerator or the brake pedal.
To remove the floor mat, reverse the
installation procedure.
POWER LIFTGATE (IF EQUIPPED)
The liftgate can be operated by the following:
•
instrument panel control button
•
key fob button
•
outside control button
•
control button in the rear cargo area
Note:
The liftgate can be reversed with a second press on a control
button or key fob and can be manually closed at any time.
Opening and Closing the power liftgate:
WARNING:
Make sure all persons are clear of the power liftgate
area before using the power liftgate control.
2009 Expedition
(exd)
Owners Guide, 2nd Printing
USA
(fus)
Driver Controls
154
