3. Locate the outboard most bulb,
turn it a
1
⁄
4
turn to the inside of the
vehicle and pull the bulb socket
straight out to remove the bulb.
Highbeam bulb replacement
4. Locate the bulb that is the most
center in the vehicle, rotate the
socket counterclockwise and pull
the bulb socket straight out to
remove the bulb.
5. Pull the bulb straight out of the
socket and push in the new bulb.
6. To complete installation, follow
the removal procedure in reverse
order.
Note:
The bulb’s metal base gets very hot during headlamp operation.
Be sure the bulb base is cool before handling.
Note:
If the bulb is accidentally touched, it should be cleaned with
rubbing alcohol before being used.
To complete installation, follow the removal procedure in reverse order.
Replacing brake/tail/turn/backup lamp bulbs
The brake/tail/turn/backup lamp bulbs are located in the tail lamp
assembly, one just below the other. Follow the same steps to replace
either bulb:
2007 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Lights
50
Summary of Contents for 2007 Escape
Page 288: ...288...
