Automatic locking mode
The automatic locking mode is not available on the driver safety belt.
In this mode, the shoulder belt is automatically pre-locked. The belt will
still retract to remove any slack in the shoulder belt. The automatic
locking mode is not available on the driver safety belt.
This mode should be used
any time
a child safety seat is installed in a
passenger front seat. Refer to
Safety restraints for children
or
Safety
seats for children
later in this chapter.
How to use the automatic locking mode
•
Buckle the combination lap and
shoulder belt.
•
Grasp the shoulder portion and
pull downward until the entire
belt is pulled out.
•
Allow the belt to retract. As the belt retracts, you will hear a clicking
sound. This indicates the safety belt is now in the automatic locking
mode.
How to disengage the automatic locking mode
Disconnect the combination lap/shoulder belt and allow it to retract
completely to disengage the automatic locking mode and activate the
vehicle sensitive (emergency) locking mode.
2006 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
69
