Ford 2006 Mondeo Page 129 Owner'S Handbook Manual Download

Page: 129 / 198

A luggage net can be attached to the
four retaining points on the load area
floor. It can prevent objects sliding
around.

LUGGAGE COVERS

WARNING

Do not place objects on the
luggage cover.

5-door

Removal

E72512

Detach the two lifting straps on the
tailgate. Release the cover at its sides
and pull it out horizontally without
tilting it.

Refitting

Insert the cover horizontally, align it
and push in as far as the stop. Attach
the lifting straps to the tailgate.

Estate

E72513

Pull out the roller cover and secure
in the retaining points. The cover can
be removed completely by pressing
both ends of the support inwards.

ROOF RACKS AND LOAD
CARRIERS

Roof rack

E72514

127

Load carrying

Summary of Contents for 2006 Mondeo







































































































































































































Search results

Summary of Contents for 2006 Mondeo

Reviews:

Related manuals for 2006 Mondeo

Brands by name

Popular brands

Ford 2006 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2006 Mondeo

Reviews:

Related manuals for 2006 Mondeo

Brands by name

Popular brands