Ford 2006 Focus Page 149 Owner'S Manual Download

Page: 149 / 224

Fuse/Relay

Location

Fuse Amp

Rating

Passenger Compartment Fuse

Panel Description

7.5A

PATS modules, Instrument cluster

7.5A

Radio (Start)

20A

Power locks (GEM)

Fuse 63 is located on the back of the fuse panel. See your authorized
dealer for service of this fuse.

Power distribution box

The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.

Always disconnect the battery before servicing high current
fuses.

To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or

refilling fluid reservoirs.

If the battery has been disconnected and reconnected, refer to the

Battery

section of the

Maintenance and Specifications

chapter.

2006 Focus

(foc)

Owners Guide (post-2002-fmt)
USA

(fus)

Roadside Emergencies

149

Summary of Contents for 2006 Focus

































































































































































































































Search results

Summary of Contents for 2006 Focus

Reviews:

Related manuals for 2006 Focus

Brands by name

Popular brands

Ford 2006 Focus, Owner'S Manual

Search results

Summary of Contents for 2006 Focus

Reviews:

Related manuals for 2006 Focus

Brands by name

Popular brands