Is the resistance greater than 10,000 ohms?
E2 CHECK CIRCUIT 833 (TN) FOR SHORT TO VOLTAGE
Ignition ON.
Measure the voltage between the ICP C2009 pin 14, circuit 833 (TN) and ground.
Is voltage present?
Yes
REPAIR circuit 833 (TN). CLEAR the DTCs. REPEAT the
self-test.
No
GO to
E3
.
E3 CHECK CIRCUIT 833 (TN) FOR AN OPEN
Ignition OFF.
Measure the resistance between the ICP C2009 pin 14, circuit 833 (TN) and the remote climate control (RCC)
module C228 pin 2, circuit 833 (TN).
Is the resistance less than 5 ohms?
Yes
GO to
E4
.
No
REPAIR circuit 833 (TN). CLEAR the DTCs. REPEAT the
self-test.
E4 CHECK CIRCUIT 832 (LB/PK) FOR SHORT TO GROUND
Measure the resistance between the ICP C2009 pin 13, circuit 832 (LB/PK) and ground.
Is the resistance greater than 10,000 ohms?
Yes
GO to
E5
.
No
REPAIR circuit 832 (LB/PK). CLEAR the DTCs. REPEAT
the self-test.
E5 CHECK CIRCUIT 832 (LB/PK) FOR SHORT TO VOLTAGE
Ignition ON.
Measure the voltage between the ICP C2009 pin 13, circuit 832 (LB/PK) and ground.
Yes
REPAIR circuit 832 (LB/PK). CLEAR the DTCs. REPEAT
the self-test.
No
GO to
E6
.
Page 17 of 47
2003 Taurus/Sable Workshop Manual
11/22/2011
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS3H/~MUS~LEN/19/...
