Ford 2002 Bantam, Workshop Manual

Page: 51 / 1663

100-04-47 Noise, Vibration and Harshness 100-04-47
DIAGNOSIS AND TESTING ( CONTINUED )
E859 EN 02/2001 2002 Bantam
CONDITIONS DETAILS/RESULTS/ACTIONS
E2: BALANCE THE WHEELS
1
Balance the wheels. REFER to Section 204-03.
- Balance the wheels and install on the vehicle.
• Does the vehicle function correctly?
Yes
Condition corrected.
No
GO TO
E3
E3: ROTATE THE WHEELS
1
Rotate the wheels. REFER to Section 204-03.
- Rotate the wheels front to rear, and rear to
front.
• Does the vehicle function correctly?
Yes
Condition corrected.
No
GO TO
E4
E4: CHECK THE RUN OUT
1
Check the run out. REFER to Section 204-03.
- Check total radial run out and total lateral run
out of the wheel.
• Is the run out less than 1.01 mm for the front
wheels and less than 1.187 mm for the rear
wheels?
Yes
GO TO
E5
No
GO TO
E6
E5: CHECK THE TYRE MOUNT ON THE WHEEL
1
Check the tyre mount on the wheel.
- Check the total radial run out again as
outlined in Pinpoint Test E4.
• Is the total radial run out less than 1.01 mm?
Yes
GO TO
E6
No
INSTALL new tyre(s) as necessary. TEST
the system for normal operation.