211-00-11
Steering System — General Information
211-00-11
GENERAL PROCEDURES
Power Steering System Purging (13 416 1)
Purging
All vehicles
1. NOTE:
When filling the power steering fluid
reservoir, make sure the power steering fluid
is clean and not agitated prior to use. The
fluid should be poured slowly into the
reservoir to minimize the possibility of
aeration. The fluid level should be checked
with the fluid cold.
Fill the power steering fluid reservoir to the
MAX mark with power steering fluid.
All except vehicles with diesel engine
2. Raise and support the vehicle. For
additional information,
3. Disconnect the crankshaft position sensor
(CKP) electrical connector.
Refer to the Wiring Diagram Section 700-06
for schematic and electrical information.
Vehicles with diesel engine
4. Disconnect the fuel injection pump electrical
connector.
1. Pull out the locking handle.
2. Disconnect the electrical connector.
E3219 EN
07/2001 2002 Bantam