Ford 1998 Windstar Page 224 Owner'S Manual Download | Manualshive

Page: 224 / 370

background image

Driving

225

*

[GF13000(ALL)01/96]

R

WARNING

Towing trailers beyond the maximum recommended
gross trailer weight exceeds the limit of the vehicle and
could result in engine damage, transaxle damage,
structural damage, loss of control, and personal injury.

*

[GF13100(ALL)05/96]

Preparing to Tow

*

[GF13200(ALL)01/96]

For your safety and for the good of your vehicle, use the right
equipment for the type of trailer you tow. Also, make sure that
all towing equipment is properly attached to your vehicle. If
you are not certain that you are using the right equipment in
the proper manner, see your dealer or a reliable trailer dealer.

%

*

[GF13300(ALL)01/96]

Hitches

*

[GF13400(ALL)01/96]

For towing trailers up to 2,000 lbs. (907 kg), use a good
weight-carrying hitch and hitch ball which uniformly distributes
the trailer tongue load through the underbody structure.

*

[GF13500(ALL)01/96]

Do not use single clamp bumper hitches or hitches that attach
to the axle.

*

[GF13600(ALL)01/96]

Whenever a trailer hitch and hardware are removed, make sure
all mounting holes in the underbody are properly sealed to
prevent exhaust fumes from entering the vehicle.

*

[GF13700(ALL)01/96]

Safety chains

*

[GF13800(ALL)01/96]

Always use safety chains between your vehicle and trailer.
Cross chains under the trailer tongue and allow slack for
turning corners. Connect safety chains to the vehicle frame or
hook retainers. Never attach chains to the bumper.

File:09wngfs.ex

Update:Mon Oct 7 11:46:08 1996

«
...
222
223
224
225
226
...
»

Summary of Contents for 1998 Windstar



















































































































































































































































































































































































Reviews:

No comments

Related manuals for 1998 Windstar

Brand: Yakima Pages: 11

Brand: iArmor Pages: 6

Brand: Romik Pages: 6

AAB-P-RZR900-K2-001

Brand: SuperATV Pages: 3

Brand: Ranger design Pages: 22

Quantum hardcoated N30216

Brand: National Cycle Pages: 3

Brand: U.S. General Pages: 8

Brand: JBL Pages: 12

Interlock 700 Series

Brand: Scania Pages: 82

Brand: TATA Motors Pages: 232

Brand: Calix Pages: 4

Brand: Renault Pages: 11

Brand: Kia Pages: 5

Brand: Toyota Pages: 204

Automobille 2004 Century

Brand: Buick Pages: 12

Brand: Honeywell Pages: 16

Brand: Honeywell Pages: 70

Brand: Honeywell Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands