M-15200K-BRL / BRRL
2021 Bronco Off-Road Roof-Mounted
LED Light Bars
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS
Ford Factory Shop Manual purchase options
www.motorcraftservice.com
Techline 1-800-367-3788
Page 4 of 15
IS M-15200K-BRL 010422
INSTALLATION PROCEDURE - Roof Mounted Light Bar (Vehicles not Equipped with Roof Rails)
NOTE:
Two versions of brackets are included in Kit M-15200K-BRL. Short brackets for the hard tops and tall brackets for
the soft tops. The kit is not recommended for hard tops with soft top front row inserts.
NOTE:
Use the General Equipment: Interior Trim Remover.
1. Remove the LH and RH front roof hard tops or raise and fold down the the front roof soft tops. Refer to owner’s manual
for additional information.
2. Remove the two accessory attachment point roof trim covers and trim mounting to access the mounting studs.
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
3
. Install the top bracket piece to the Rigid roof line bracket using the four small screws.
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
