M-15200K-BRL / BRRL
2021 Bronco Off-Road Roof-Mounted
LED Light Bars
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS
Ford Factory Shop Manual purchase options
www.motorcraftservice.com
Techline 1-800-367-3788
Page 11 of 15
IS M-15200K-BRL 010422
7. Install the light bar covers.
NOTE:
Light bar covers must be installed at all times when driving on roads.
8. Proceed to wiring section to complete installation.
LIGHT BAR WIRING PROCEDURE
NOTE:
The RH and LH roof hard tops will need to be removed or the soft tops folded down to perform this procedure.
1. Open the vehicle’s hood and disconnect the battery cable to ground.
2. Locate blunt cut wire #1 (wire color YE) within the first bundle of blunt cut wires (upper group). Locate blunt cut #7 (wire
color BN/WH) within the second bundle of blunt cut wires (lower group). Splice the two wires together using the
provided splicing kit WT-56814.
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
