Upgrading V-Series Appliances
65
Upgrading V-Series Appliances
Content Gateway logs
If the appliance hosts TRITON AP-WEB (Web Security Gateway / Anywhere), during
the upgrade, depending on their size, older Content Gateway logs may be
automatically removed by the upgrade procedure to make room for the new version.
To ensure that all Content Gateway logs are retained, you can download the Content
Gateway logging directory.
1. In the Appliance Manager, go to
Administration >Logs
.
2. Select the
Content Gateway
module and then
Download entire log file
.
3. Click
Submit
and specify a location to save the file.
Policy databases and TRITON databases are not affected by the upgrade.
Content Gateway Integrated Windows Authentication (IWA) settings
IWA domain joins should be preserved through the upgrade process. However, in case
there is an error and IWA domain joins are dropped, make a record of the settings
before starting the upgrade. Log on to Content Gateway and record the IWA settings.
Keep this record where you can easily retrieve it after the upgrade.
Administrator accounts
Make sure administrator accounts authenticated by a directory service have an email
address specified in the directory service. In versions 7.8.1 and later, an email address
is required for each administrator account (except group accounts).
Content Gateway changes
Forcepoint Web Protection Release Notes
for information about
enhancements and changes in version 8.2.0.
Upgrade instructions
V-Series Appliance Upgrade Guide | Upgrades to v8.2.x
1. If you have multiple V-Series appliances, read
before
following this procedure.
Important
V-Series appliance services are not available while the
patch is being applied and until the appliance completes
restarting. See
Estimates of time to complete upgrade
.
It is best to perform the upgrade at a time when service
demand is low.
