Forcepoint S1104, Hardware Manual

Page: 8 / 20

Introducing the appliances | 8
Note: Models S1104 and S2008 do not include Remote Management Module ports.
Features
You can use the Remote Management Module web interface to perform several tasks.
• View system information
• View system health, including:
• Sensor readings
• Event log
• Control the appliance remotely using console redirection
• Turn the appliance on or off
eUSB support
Some S2008 or S3008 models contain an integrated eUSB device that allows you to re-image the appliance or
run hardware diagnostics without the use of external media.
To determine if your model includes the eUSB device, locate the appliance part number. The part number can be
found on your activation certificate, or printed on a label on the appliance cover.
Appliances with the following part numbers contain the eUSB device:
•
S2008
— 610-1653-05 or higher
•
S3008
— 610-1654-05 or higher
Related tasks
Update the eUSB device on page 12
You can use the eUSB Flashing Utility to update the versions available on the eUSB device.
Regulatory information
In compliance with Federal Communications Commission (FCC) regulations, this section provides information
about the appliance models and contact information.
Model information
The regulatory information applies to Sidewinder S1104, S2008, and S3008 models.
Table 3: Regulatory model information
Sidewinder model Regulatory model
S1104 S1104
S2008 S2008/S3008
S3008 S2008/S3008