Force LC-EF3-GE-48T, Feature Highlights And Installation Instructions

Page: 1 / 4

101-00114-01
48-Port 10/100/1000 Base-T Ethernet Line Card
Feature Highlights and Installation Instructions
Catalog Number: LC-EF3-GE-48T
Feature Highlights
• 48 ports with RJ-45 connectors that support auto-negotiation or 10/100/1000 Base-T
speed.
• Use CAT5E unshielded twisted pair (UTP) cables. Cables, connectors, and their use
must comply with EIA/TIA 568 Standard in the US, and ISO/IEC 11801 (2nd Edition)
elsewhere. It is recommended that the cable be certified with a cable tester.
• The EF3 series line cards support a single 18M user configurable CAM with flexible
partition assignments. The following max entries are:
•
256K Layer 3 IP forward information base (FIB)
• 256K Layer 2 FIB
• 64K Layer 3 IPv6 FIB
• 128K Layer 2 and Layer 3 access control list (ACL) entries
• 24K IPv6 ACL entries
• Supports online insertion and removal (OIR) of line card.
• Supports ingress and egress Layer 2 and Layer 3 ACL processing across all ports.
• Requires FTOS 6.2.1.0 or higher
• Supports full duplex only
Label Description
Port 48 Ports
Port LEDs
Green = link up
Unlit = port is down
Flashing Green = activity
Status LED Flashing Green = Initializing
Green = Line card online
Amber = Failed power-on self test or fault detected
Unlit = No power to the line card or the line card is administratively
shut down
Warning: Electrostatic discharge (ESD) damage can occur if components are
mishandled. Always wear an ESD-preventive wrist or ankle strap when handling
line cards. Connect the ESD strap to the grounding plug. Place line cards on an
antistatic surface and store in anti-static bags when they are not installed.