Technical Manual
Page 26
CODEL
Issue : B
Rev. : 1
Date : 11/07/22
Ref. : 100042
Note
: It is important to make a note of this new number as it will not be possible to change the instrument set-
up without it.
6.10.5. Identity
The communication address for the serial communication output is set here. Each device on the serial
communications highway should have a unique communications address identity number.
6.10.6.Protocol
This is used to select the required serial communication protocol:
-
ModBus for standard MODBUS
-
CODEL for Codel’s own diagnostic software
6.10.7. Baud Rate
This is used to select the speed of communications
6.10.8. Set Clock
Scroll down the options setting each in turn
– year, month, day, hour, minute and second. Press ENTER and the
time is now set for this real-time clock. Note that after the clock has been altered any old data will refer to the
previous clock settings and not the reconfigured time.
6.10.9. Calibrate
Summary of Contents for CODEL TunnelTech205
