16
5-1-1. Input Select
Selecting
Input Select
in the Video Block diagram opens the following menu screen.
Item
Default
Setting
Description
Format
-
-
Displays the detected input signal format.
If unidentifiable video signal is input, for
example,
“Not Supported
(1920 * 1080/59.94i)
” appears.
In which case, the input signal is supposed as
the one in parenthesis and proceeded.
Source
Select
SDI 1
SDI 1
SDI 2a-2d
Selects a video signal.
Enabled when
SDI 2 Terminal
is set to
Input
.
SDI 2
Terminal
Input
Input
Output
Selects input or output for SDI 2a-2d ports.
Loss
Mode
Black
(Link)
Black(Link)
Black(Separate)
Auto Freeze
Output Mute
Selects the output mode for input signal loss.
Black (Link)(Separate)
: Outputs a black
video.
Auto Freeze
: Freezes and outputs the last
normal video.
Output Mute
: Stops outputting video signals.
See note
(*2)
for 4K Quad Link 3G input.
Format
Detection
Auto
Auto
Manual
Auto
: Automatically detects and determines
the input signal format.
Manual
: Defines the input signal format using
the following parameters.
The following parameters are effective if
Format Convert
is set to
Manual
.
Standard
(*1)
1080
SD
720
1080
2160
Specifies the number of vertical pixels (lines).
Horizontal
Size
1920/3840
1920/3840
The number of horizontal pixels. (Fixed)
Frame
Rate
(*1)
59.94i /
29.97PsF
59.94p
50p
29.97p
23.98p
59.94i/29.97PsF
50i/25PsF
23.98PsF
Specifies the frame rate.
Settable frame rates according to the
Standard
selection are displayed.
If
Standard
selection is changed and the
frame rate becomes unaccepted, this field
becomes vacant. In which case, select the
correct frame rate.
Level
Follow
Input
Follow Input
Level A
Level B(Dual
Link)
Specifies the 3G-SDI level.
Displayed if
Standard
and Frame Rate
combination is 3G-SDI or 12G-SDI.
Follow Input
: Uses the same level as input.