FOR-A USF-1013MUX, Operator'S Manual, Page: 7 / 24

7
4. Operation Examples
4-1. SDI Embedded Output of AES Audio
This example embeds synchronous/ asynchronous digital audio input (Ch.1-4) to SDI embedded
audio Group 1 (Ch. 1-4).
Audio source AES input Ch1 to 4
Channel to be embedded SDI output Ch1 to 4 (Group 1)

Setting Required Parameters
Menu Parameter Channel Setting Description Refer to
Mapping
SDI Audio
Output
Mappings
Ch. 1 AES Ch. 1
Assigns AES input
Ch. 1-4 to SDI output
Ch. 1-4.
5-2-1
Ch. 2 AES Ch. 2
Ch. 3 AES Ch. 3
Ch. 4 AES Ch. 4
Output Audio Mode Group1 *
Mapping
(default) Performs Group1
audio embedding.
5-3-1
* For SD-SDI signals, Mapping or Through should be selected for all groups.

Adjustable Parameters
Menu Parameter Channel
Default
Setting
Description Refer to
Input
AES Audio
Clock
Ch. 1-4 SRC On
Allows you to select
Sync. or Async. for audio
sources.
5-1-2
AES PCM
Mode
Ch. 1/2
Ch. 3/4
Auto
Allows you to select
PCM or NON-PCM for
audio sources.
5-1-3
AES Audio
Gain Master
Ch. 1-4
0.0dB
Allows you to adjust
input gain.
5-1-4
Output
SDI Mono Sum
Ch. 1/2
Ch. 3/4
Stereo
Allows you to select
stereo or mono for
output audio.
5-3-2
SDI Audio
Resolution
Ch. 1-4 24bit
Allows you to select bit
depth for output audio.
5-3-3
SDI Audio
Mute
Ch. 1-4 Off
Allows you to mute audio
output.
5-3-4
SDI Audio
Gain Master
Ch. 1-4
0.0dB
Allows you to adjust
output gain.
5-3-5
System
Sync Format --- Auto
Allows you to select an
SDI format. Select
Auto
to switch multiple
formats.
5-4-1
Audio Test
Signal Output
--- Off
Allows you to output
audio test signal. Select
1kHz Tone to output
audio test signal.
5-4-1
USF-
1013MUX
Group 1