FOR-A MV-160HS Multi Viewer, Operation Manual

Page: 51 / 66

3
2. Control Commands
2-1. Split Screen Display Command
Used to set a split screen to display on the output screen.
Byte Parameter Command Description
1 S
2
Command code
I
1 Quad screen display
2 12+1G screen display
3 12+2G screen display
4 12+3G screen display
5 12+4G screen display
6 16 split screen display
3 Command parameter
7 Full screen display
4 CR
5
End code
LF
2-2. Group Output Split Screen Display Command
Used to set the window display mode for each Group window.
Byte Parameter Command Description
1 S
2
Command code
G
1 GROUP1 window setting
2 GROUP2 window setting
3 GROUP3 window setting
3 Command parameter
4 GROUP4 window setting
0 Full screen display
4 Command parameter
1 Quad screen display
5 CR
6
End code
LF
2-3. USER Data Save Command
Used to save the current setting data as the USER data.
Byte Parameter Command Description
1 S
2
Command code
V
1 Saving to USER1
3 Command parameter
2 Saving to USER2
4 CR
5
End code
LF