13
4-6. Selecting Split Screen Pages
In the MV-1600, the quad screen has four pages (A to D) and 9-split screen has two pages (A
and B). The each page is allocated a set of different channels.
The followings are the procedure to switch pages of each split screen.
1. Press a SPLIT button for the split screen to display to enter split mode. In the split mode, the
selected SPLIT button and the displayed page light up and the available pages flash for
about 5 seconds.
2. Select and press a page button to display. The split mode is released, and the selected page
stops flashing and lights up.
To switch the displayed page also need to press SPLIT button to enter split mode before
pressing the page button to display.
Channel assignment for each quad screen page (A to D)
Channel assignment for each 9-split screen page(A and B)
*Only in SXGA output
IMPORTANT
The page switching is not available for 16-split screen display.
In quad and 16-split screen, the same channels are displayed in SXGA output, VIDEO
output and the video transmission over a LAN interface. However, when 9-split screen
is selected, 9-split screen is displayed in SXGA output, but 16-split screen is displayed
in VIDEO output and the video transmission over a LAN interface.
The channel assignments for pages cannot be changed.
There may be a distortion (1frame:1/60sec.) when switching channels.
POWER
ON
OFF
POWER
FAN ALARM
1
AUTO
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MENU
SPLIT
VIDEO SELECT
MV-1600
MULTI VIEWER
ALARM
RESET
A
D
B
C
ENTER
A, B, C, D button (Page button)
SPLIT button
1ch
3ch
2ch
4ch
5ch
7ch
6ch
8ch
9ch
11ch
10ch
12ch
13ch
15ch
14ch
16ch
A B C D
1ch 2ch 3ch
4ch 5ch 6ch
7ch 8ch 9ch
10ch 11ch 12ch
13ch 14ch 15ch
16ch 1ch 2ch
A B
Summary of Contents for MV-1600
