90
(3) Press ENTER to perform the crosspoint switch. The screen will return to the default
display.
5-5-2. Button Assignment Change
To change button assignments, proceed as follows:
(1) Press a button while holding down ENTER. The button will blink.
The first line will display the function and its parameter currently assigned to the button
and the second line will display its detailed information.
(2) Press UP or DOWN to select a function to be assigned. Press ENTER to apply the
change.
(3) The display changes to the parameter selection according to the selected function.
Press UP or DOWN to select the parameter value. Press ENTER to confirm the selection.
The cursor will move to the next parameter if there are two or more parameters. Set the
value and press ENTER in the same way.
Note that parameters blink during the selection.
When all settings are finished, the screen automatically returns to its default display.
PAGE A
(H OLD 3SEC )
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(H OLD 3SEC )
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
DESTINATION
5
[DST 5 ]
D
：
DST 5
S
SRC 8
PAGE A
(H OLD 3SEC )
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(H OLD 3SEC )
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
PAGE A
(H OLD 3SEC )
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(H OLD 3SEC )
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
SOURCE
PAGE A
(H OLD 3SEC )
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(H OLD 3SEC )
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
SOURCE
1
[SRC 1
]
PAGE A
(H OLD 3SEC )
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(H OLD 3SEC )
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
