82
5-4-3-11. SALVO CLR
This menu allows you to clear a specific salvo assigned to a button.
Turn the control knob to select a salvo to clear, then press the knob to confirm the
selection.
If any salvo is assigned, the menu display appears as shown below.
5-4-3-12. BTN ASSIGN
This menu allows you to assign button functions.
►See section 5-3 “Function Buttons” for the assignable functions.
Select a button to change the button assignment by turning and pressing the control knob,
or by pressing the desired button.
Select a page to change the button assignment by turning the control knob, then press the
knob to confirm the selection.
Turn the control knob to select a function, then press the knob to confirm the selection. Set
details for the function if necessary.
The menu display asks you to confirm the assignment change as shown above when
necessary settings are complete. To apply the change to the system, turn and press the
control knob to select Yes. Selecting No cancels the change and returns to the menu
display to select buttons.
SETTING>BTN ASSIGN
BTN NO: 1<ENT>
SETTING>BTN ASSIGN
PAGE: 1<ENT>
SETTING>BTN ASSIGN
FUNC:DEST <ENT>
SETTING>BTN ASSIGN
EXEC:NO <ENT>
SALVO DELETE
NO: 1<ENT>
SALVO DELETE
(NO SALVO DATA)
