133
1) Open the
Gearbox Settings
page in the Web GUI and select signal formats under
From
and
To
as shown below for a Gearbox in the MFR-16SDIGB card block. (This example
sets Gearbox 1 on the Slot 1 card.)
2) Open the
Source Assignment
page in the Web GUI and assign the physical channels
(
SDI1-4
) to logical channels (
SRC 1-4
).
3) Use a remote control unit or the Crosspoint page in the Web GUI to assign output
channels to
SRC1-4
.
8-3-2. Converting 2SI to SQD Output (MFR-16SDOGB)
1) Open the
Gearbox Settings
page in the Web GUI and select signal formats under
From
and
To
as shown below for a Gearbox in the MFR-16SDOGB card block. (This example
sets Gearbox 1 on the Slot 9 card.)
2) Open the
Destination Assignment
page in the Web GUI and assign the physical
channels (
SDI1-4
) to logical channels (
DST 1-4
).
3) Use a remote control unit or the Crosspoint page in the Web GUI to assign input channels
to
DST1-4
.
MFR-16SDOGB
MFR-5000
routing
Gearbox 1
Quad Link
3G-SDI
(2SI)
Quad Link
3G-SDI
(SQD)
