49
5-5. Operation Using the Menu Display (MFR-16RUD)
The MFR-16RUD, a remote control unit with display, allows you to select destination channels and
switch crosspoints using the menu display. Function button assignments are also possible.
Default Display
The Current Destination Channel name is displayed on the first line.
The Source Channel name selected for Current Destination is displayed on the second line.
5-5-1. Crosspoint Switching
To switch crosspoints on the MFR-16RUD using the menu display, proceed as follows:
1.
Press the
UP
or
DOWN
button to display current destination. (DST 5 in this example)
2.
Press
ENTER
.
3.
The cursor automatically moves to the second line (Source side). Press
UP
or
DOWN
to
select a source channel.
Note that source name blinks during a selection.
D
DST 1
S
：
SRC 1
PAGE A
(HOLD 3SEC)
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(HOLD 3SEC)
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
D
DST 5
S
：
SRC 5
PAGE A
(HOLD 3SEC)
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(HOLD 3SEC)
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
D
：
DST 5
S
SRC 5
PAGE A
(HOLD 3SEC)
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(HOLD 3SEC)
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
D
：
DST 5
S
SRC 8
PAGE A
(HOLD 3SEC)
PAGE B
LOCK
RESET
POWER
BUSY
SETUP
LOCK DEST
(HOLD 3SEC)
LOCK PANL
CANCEL
ENTER
A
B
MFR-16RUD
REMOTE CONTROL UNIT
Blinks
