39
5-4-3. Setting Mode Menu (MFR-39RU)
Setting Mode menu items are as shown below. Follow the procedure below to change
settings.
(1) Turn and press CONTROL to select and enter each menu.
(2) Turn and press CONTROL to select and confirm a menu setting.
Setting Mode menu items
MENU
Setting
Description
DEF MODE *
DESTINATION
SOURCE
LEVEL
PAGE_Grp-All
PAGE_Grp-A
to
PAGE_Grp-D
SETTING
Selects a mode to be displayed on the menu display
at remote control unit start-up.
DEF DEST *
Selects a destination to be displayed at remote
control unit start-up.
DEF LEVEL*
Selects a level to be displayed at remote control unit
start-up.
DEF PAGE *
LAST
SELECT
Selects a page to be displayed at remote control
unit start-up.
LAST
:
Displays the page that was displayed
immediately before shutdown.
SELECT
: Displays the page that was set by DEF
PAGE A-D.
DEF PAGE A-D *
Selects a Group A-D page to be displayed at remote
control unit start-up.
PAGE MODE
UP/DOWN
JUMP
Selects
CONTROL
behavior in Page mode.
UP/DOWN
: Every turn of
CONTROL
changes
the page one page forward or
backward.
JUMP
:
Turn and press
CONTROL
to select
and display the page.
PAGE ASSIGN
ONE PAGE
ALL PAGE
Selects a PAGE button assignment.
ONE PAGE
: Assigns the
PAGE
button to one page.
ALL PAGE
: Assigns the
PAGE
button to all pages.
WRAPAROUND
ON
OFF
Turns wraparound
ON
or
OFF
when changing a
page using
CONTROL
or
PAGE UP/DOWN
button.
ON
:
The page after Page MAX continues as
Page 1 then Page2, in a continuous circular
series.
OFF
: Wraparound is turned off.
DSTINHIBIT
ON
OFF
Sets the inhibit function to a desired destination.
ON
: If set, the destination channel
cannot be selected. The channel
button is marked with an X.
OFF
: If set, DST Inhibit is released and the
destination channel can be selected.
SRCINHIBIT
ON
OFF
Sets the inhibit function to a desired source.
ON
: If set, the source channel cannot
be selected. The channel button
is marked with an X.
OFF
: If set, SRC Inhibit is released.