21
4-3. RU Settings
The
RU Settings
page allows you to set the remote control panel buttons and LCD settings.
Available settings vary depending on the remote control unit type.
Parameter
Description
IP Address
(*1)
Sets the IP address.
Unit Name
Changes the remote control unit name displayed in the
navigation tree on the left side of the screen.
Up to 10 alphanumeric characters available (excluding the
following: & % ( ) < >.).
To change the name, check on the
Enable
checkbox, enter a
new name, then click
Send
.
Clicking
System Settings
on the left side of the screen updates
the screen and applies the new name.
MENU Brightness
Sets the MENU display panel brightness (1-8).
Button Brightness
Sets the button LCD brightness (1-8).
Button Brightness (Low Light) Selects the button brightness between
Normal
and
Reduce
(dim-light).
Function/ Source/
Destination/Lock/
Page Button Color/
Level Button/
Tally Color
LCD
Color
Sets the LCD Color for each function respectively.
Button
Color
Sets the Button Color for each function respectively.
Master ID (for RU Linkage)
Specifies the master unit ID for multi-panel operation.
RU Linkage
Enables and disables multi-panel operation.
Name Type
Dest
Sets the destination name display format.
Src
Sets the source name display format.
* Registered bitmap image displayed if
Use Bitmap
is checked.
Level
Sets the level name display format.
Display Setting
Sets the displayed MFR-18RU/18RUA/16RUTA/8RUA LCD
screen name.
(
Destination Name:
Destination channel name
Source Name:
Source channel name)
Src (Bus Selector) Button
Display
Sets the LCD button display text when assigning a button Src
(Bus Selector).
Both
(Src&Dst): Displays the Source and Destination names.
Source Only
: Displays only the Source name.
