52
Save LTO drive dump
The procedure for saving dump data from LTO drives is as described below.
If you are experiencing problems with your LTO drive and are required to collect dump data by
FOR-A support staff, use the following procedure.
(1) Connect a USB memory stick.
(2) Select
Save LTO drive dump
in the
LTO Driver Maintenance
screen.
(3) A message "
Do you save the LTO dump data?
" will appear. Press [
ENTER
] to execute
the operation.
*
Dump data is stored in a file named "
LTR200HSDump.zip
." Its file size varies depending on
usage conditions. In some cases, the file size may exceed 10 MB.
4-10-2. Saving the System Log
The procedure for saving the system log is described below. When a malfunction has occurred
and a FOR-A support staff member requests a system log file, follow the steps below to
acquire the system log file.
The system log file size may exceed 500 MB when saving logs. Be sure to use a USB memory
stick with enough available space.
(1) Connect a USB memory.
(2)
Select “
Save system log
” in the
Maintenance
screen.
(3)
The “
Do you save the system log?
” message now appears. Press the [
ENTER
] button
to save the logs.
*
The system log is saved under the filename LTR200HSlog.zip. The system log file size will
differ depending on the operating conditions. In some conditions, it may exceed 10MB.
