25
4-2. LTO Operations Screen
When
LTO Operations
is selected in the
Main Menu
screen, the
LTO Operations
screen such as
the one shown below is displayed.
Use the [
] and [
] buttons or the jog dial to select menu items, and enter the selected items by
pressing the [
ENTER
] or [
PLAY
] button. When the [
MENU
] or [
] button is pressed, the
Main
Menu
screen is restored.
In recording mode, the
LTO Operations
screen can be displayed simply by pressing
the [
LTO
] button. In playback mode, the
File List
screen is displayed after the [
LTO
]
button is pressed, and when the [
] button is pressed, the
LTO Operations
screen is
displayed.
Item
Description
Mount LTO tape
Mounts the LTO
tape. If a tape is already mounted, "
Eject LTO tape
" will
be displayed.
Eject LTO tape
Unmounts and ejects the LTO tape. If no tape is mounted, "
Mount LTO
tape
" will be displayed.
Format LTO tape
Formats the LTO tape in the LTFS format to enable the tape to be used.
For details, refer to “2-4-3. Formatting an LTO Tape Cartridge.”
Recover LTO tape
(
*
1)
Recovers the LTO tape if its file information can be recovered.
Copy LTO tape
(single drive)
Copies an LTO tape.
Refer to "2-4-4. Copying an LTO Tape Cartridge" for details.
*1 This operation is used when the power has been turned off accidentally, for instance, before a tape
unmount was completed and is not used during normal operation. It may take 2 or more hours to recover
tape data from a power failure. During the recovery process, the LTO tape may be ejected or [6] (SCD
error code) may blink on the panel. Note that, in some cases, tape content may not be successfully
recovered.
If mounting takes longer than before after tape data has been recovered
, execute “Repair slow mounting
LTO tape
” in the LTO Driver Maintenance Menu Screen (see 4-10-1.).
When the LTO tape
is unmounted
When the LTO tape
is mounted
