21
3. Recording and Playback
Use L
TO-6 or LTO-7 tape cartridges
with the LTR-200HS7 unit. Also use LTO tape
cartridges that have been formatted by the same unit.
To record and play back data, the LTO tape cartridge must be mounted. For details on how to insert
and mount tapes
, refer to “2-4-1. Inserting and Mounting a Tape Cartridge."
A pop-up message will appear asking you to mount an LTO tape when you try to record
files while the LTO tape is not mounted. Click [
ENTER
] to mount the LTO tape.
3-1. Recording
(1) Set the OPERATION switch (upper right, front panel) to
REC
(bottom position) to enter
Recording mode. (Refer to "5-1-2.
Switches” for details on the switches.)
(2) Set the REC MODE switch to
MANUAL
(bottom position). (For details on the switches, refer to
“5-1-2. Switches.”)
(3) Set the profile of the file to be recorded.
(For details on profiles, refer to “4-7-2. Recording
Settings #2 Screen.
”)
(4) Press the [
PLAY
] button while holding down the [
REC
] button to start recording. While
recording is in progress, the [
REC
] button lights red.
(5) Press the [
STOP
] button to stop recording.
*
If a short recording DURATION has been set, recording will stop at the set time without pressing the
[
STOP
] button.
*
To record while the VTR is being controlled automatically, refer to "5-1-3-2. Start and End Timecode
Display
” and "4-4 Time Code Display and Setting Screen (Recording).”
REC
STOP
FWD
PLAY
REV
IN/DUR
IN/OUT
AUDIO
LEVEL
REC
REM.3
MANUAL
USB
METER
REM.1
PLAY
2
LOCK
IN/DUR
IN/OUT
AUDIO
LEVEL
REC
REM.3
MANUAL
USB
METER
REM.1
PLAY
2
LOCK
LEVEL
PHONES
REV
PLAY
FWD
STOP
REC
META
TC
SET IN
ENTER SET OUT
MENU
LTO
VAR
SHTL
LTO RECORDER
LTR-200HS
USB
AUDIO
METER
PLAY
LEVEL
REM.1
IN/OUT
REC
LOCK
IN/DUR
MANUAL
REM.3
2
