FOR-A IVS-200, Operation Manual

Page: 47 / 64

47
8-3-3. EFFECTIVE AREA
Click EFFECTIVE AREA on the STABILIZE menu to open the EFFECTIVE AREA menu as
shown below.
Item Setting description Reference
(1) EFFECTIVE AREA
Allows you to set an effective area.
[Setting range]
4 : 3 (+0) to 4 : 3 (+7),
16 : 9 (-7) to 16 : 9 (+7),
ADJUST
[Default value]
4 : 3 (+0)
5-4-2
(2) MARKER
Allows you to select whether to display an
EFFECTIVE AREA selection marker on video
output.
[Setting range]
ON, OFF
[Default value]
OFF
(3) START(H)
(4) END(H)
Allows you to set the horizontal extent of the
effective area if EFFECTIVE AREA is set to
ADJUST.
[Setting range]
0 to 720
* Odd values cannot be set. If an odd value is
entered, the value will be adjusted to the entered
value minus 1.
(5) START(V)
(6) END(V)
Allows you to set the vertical extent of the
effective area if EFFECTIVE AREA is set to
ADJUST.
[Setting range]
0 to 242(NTSC), 0 to 286(PAL)
(7) OK Applies the settings to the IVS-200.
－
(8) MAIN MENU Returns to the MAIN menu. 8-3-1
(9) STABILIZE Returns to the STABILIZE menu. 8-3-2