16
4-3. Connecting Two or More AUX Units to a Switcher
When connecting two or more AUX Units to a switcher, each AUX Unit should have a different IP
address and AUX ID number. Refer to the following sections to change these settings.
4-3-1. Changing the AUX Unit IP Address
HVS-AUX16A/16B/32A/64A
The following setting procedure changes the IP address of HVS-AUX16A (2) in the above
figure example, from
192.168.0.20
to
192.168.0.21
.
(1) Press SETUP. All indicators turn orange and indicate that the AUX Unit is in menu
SETUP mode.
(2) Press AUX IP.
(3) To obtain the current IP address, respectively press Buttons 5 to 8 , which represent
each octet of the IP address. Each octet number will be displayed on Buttons 9 to 16 in
binary mode: On or Off.
IP address
1st octet
2nd octet
3rd octet
4th octet
192.168.0.20
192
168
0
20
(4)
Press and hold
down 8 (the fourth octet button). The button will blink.
(5) To change the fourth octet number, use 9 to 16. In this example, the number should be
changed from
20
to
21
(16+4+1), then turn the buttons on or off as shown in the figure
below:
off, off, off, on, off, on, off, on
.
(6) Once the IP address is changed, LOCK will blink.
Press and hold down
LOCK to
confirm the change. The AUX Unit restarts automatically. (To cancel the process, press
SHIFT/TAKE
without pressing
LOCK
.
）
To return settings to default, press and hold down AUX IP.
128
64
32
16
8 4 2 1
0
0
0
1
0 1 0 0 20
0
0
0
1
0 1 0 1 21
(7) To verify the change, press SETUP, AUX IP, and then 8 .
Check whether Buttons 9 to 16
show number “21” in binary mode.
*
Use the same procedure to change NETMASK, SW IP or DEFAULT GATEWAY, as
necessary.
POWER
BUSY SETUP
LOCK RESET
128
64
32
16
8
4
2
1
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
LOCK
SHIFT/TAKE
AUXILIARY UNIT
HVS-AUX16A
NET MASK
AUX IP
SW IP
AUX ID
OCTET
DC12V IN
LAN
HUB
HVS-AUX16A (1) rear panel
REF OUT
1
1
2
3
4
5
6
7
8
2
3
4
A
B
C
REF IN
1
2
2
AC100-240V 50/60Hz IN
AC100-240V 50/60Hz IN
1
TO OU
LAN
GENLOCK
SDI INPUT
RS-422
GPI IN/TALLY OUT
HDMI OUT
AUX
HVS-100 rear panel
192.168.0.10
192.168.0.20
AUX ID: 1
DC12V IN
LAN
HVS-AUX16A (2) rear panel
192.168.0.21
AUX ID: 2
Straight-through cable
