193
23. Reboot and Initialize
23-1. Rebooting System
(1) Press MENU in the CONTROL block, then press SETUP to display the SETUP top menu.
(2) Turn F1 to select SYSTEM, then press F1 or the page down button to open the [SETUP -
SYSTEM] menu.
(3) Turn F1 to select REBOOT, and then press F1. Press the ENTER button in the
SELECT/KEYPAD block to reboot the system.
SETUP :>FORMAT >REF I/O >ARCNET >ETHERNET
SYSTEM :>RS-422 >TIME >INIT >
REBOOT
23-2. System Initialization
To initialize the system settings, follow the procedure below.
(1) Press MENU in the CONTROL block, then press SETUP to display the SETUP top menu.
(2) Turn F1 to select SYSTEM, then press F1 or the page down button to open the [SETUP -
SYSTEM] menu.
(3) Turn F1 to select INIT, then press F1 or the page down button to display the [SETUP -
SYSTEM - INIT] menu.
SETUP :>FORMAT >REF I/O >ARCNET >ETHERNET
SYSTEM :>RS-422 >TIME >
INIT
>REBOOT
(4) Turn F1 to select SETUP(expSYS) , then press F1 to initialize the switcher setup data aside
from the system data.
SYSTEM : INIT : LOAD : : 1/1
INIT : >
CURRENT
: =LAST : :
CURRENT:
Resets settings for backgrounds, keys and mattes.
SETUP(expSYS): Resets the SETUP menu parameters and still memory, aside from the
following parameters:
-FORMAT in the [SETUP - SYSTEM - FORMAT] menu
-All parameters in the [SETUP - SYSTEM - ARCNET] menu
-All parameters in the [SETUP - SYSTEM - ETHERNET] menu
CUR&SETUP:
Resets settings including CURRENT and SETUP(expSYS) above.
FACTORY:
Resets settings including CURRENT and SETUP (all SETUP menu
parameters) above.
See section 4-4. "How to Return Settings to Default" for initializing menus.
See section 16-6. "Loading Event at Start-up" for how to load the desired settings at system
startup.
