136
15-4. Setting Up Each Split Area
15-4-1. Titles
(1) Quickly press MV1 twice in the KEY/AUX block to display the [SETUP - OUTPUT - MV1]
menu.
(2) Turn F2 to select a channel number (split area) of the split screen under the
SCREEN
item.
OUTPUT : DIV :SCREEN :SIGNAL : CHARA : 1/6
MV1 : =4
: =
1
: =IN01 : =
OFF
:
(3) Turn F4 to select the type of title display under
CHARA
. Short and long names can be
used for titles.
CHARA setting
Description
OFF
Displays no title.
SHORT
Displays a title within 4 characters.
LONG
Displays a title within 8 characters.
Titles for input signals can be set and changed in the [SETUP - INPUT - RENAME] menu.
(See section 5-1. "How to Assign User Names to Sources.")
Titles for output signals can be set and changed in the [SETUP - OUTPUT - RENAME] menu.
(See "Changing Output Signal Names" in the next page.)
(4) Press the page down button to go to PAGE 3. The settings in this page are shared among
all split windows.
OUTPUT : TITLE AREA/POSITION : : 3/6
MV1 TITL: =
WIDE
:X=
0
Y=-
100
: :
(5) Turn F2 to select the width of the title background.
Item
Description
WIDE
Spreads the title background to the width of the screen.
NORMAL(default)
Adjusts the width of the title background to fit the title.
OFF
Title Backgrounds are not displayed.
(6) Turning F2 selects the horizontal title position and turning F3 selects the vertical title
position respectively from the three options.
Item
Description
TITLE AREA
POSITION
X
Selects the horizontal title position from -100 (left), 0 (middle) or 100
(right).
Y
Selects the vertical title position from 100 (high), 0 (middle) or -100
(low).
Setting Example
In this setting example, the multiviewer is set as shown on the right hand side with the
multiviewer settings in the table below.
(Names are default settings.)
Channel
number
SIGNAL
setting
CHARA
setting
WIDE/NORMAL
selection
1 IN01
OFF
NORMAL
2 IN02
SHORT
3 ME2PRV
LONG
4 ME2PGM
LONG
