FOR-A HVS-350HS, Operation Manual, Page: 173 / 266

159
22. Reboot and Initialize
22-1. Rebooting System
(1) Press the MENU control button, then press the SETUP button to display the SETUP top
menu.
(2) Turn F1 to select SYSTEM, then press F1 or the page down button to open the [SETUP-
SYSTEM] menu.
(3) Turn F1 to select REBOOT, and then press F1. Press the ENTER button in the
SELECT/KEYPAD block to reboot the system.
SETUP :>FORMAT >REF I/O >ARCNET >ETHERNET
SYSTEM :>RS-422 >TIME >INIT >
REBOOT
22-2. System Initialization
To initialize the system settings, follow the procedure below.
(1) Press the MENU control button, then press the SETUP button to display the SETUP top
menu.
(2) Turn F1 to select SYSTEM, then press F1 or the page down button to open the [SETUP-
SYSTEM] menu.
(3) Turn F1 to select INIT, then press F1 or the page down button to display the
[SETUP-SYSTEM-INIT] menu.
SETUP :>FORMAT >REF I/O >ARCNET >ETHERNET
SYSTEM :>RS-422 >TIME >
INIT >REBOOT
(4) Turn F1 to select SETUP(expSYS) , then press F1 to initialize the switcher setup data aside
from the system data.
SYSTEM : INIT : LOAD : : 1/1
INIT : >
CURRENT : =LAST : :
CURRENT: Resets settings for the background, KEY, PinP, DSK and MATT.
SETUP(expSYS): Resets the SETUP menu aside from the [SETUP-SYSTEM] menu.
CUR&SETUP: Resets settings including CURRENT and SETUP(expSYS) above.
FACTORY: Resets settings including CURRENT and SETUP including the
[SETUP-SYSTEM] menu.
See section 4-4. "How to Return Settings to Default" for initializing menus.
See section 17-6. "Loading Event at Start-up" for how to load the desired settings at system
startup.