44
7. Event Memory
7-1. About Event Memory
Event Memory allows you to save FA-10DCCRU settings and load them when needed.
EVENT MEMORY can store 100 (1-100) settings, which are saved in the FA-10DCCRU and
cannot be used from main units.
In the following situations, event operations are disabled:
While selecting an FS for FA-505, FA-1010 or FA-9520 in FA9520 mode (FS SEL is lit)
To enable event operation, press FS SEL to turn off the button light.
While in System Settings (GRP ADJ/SYSTEM is flashing)
To enable event operation, press GRP ADJ/SYSTEM to exit the System setting mode.
While Changing Connection Mode (FS SEL is flashing)
To enable event operation, press SELECT or FS SEL to complete the change, or complete
the connection process.
While Selecting a Unit ID (11-15 UNIT is flashing)
To enable event operation, complete the connection process.
7-2. Data Stored in Events
When connecting an FA-505, FA-1010 or FA-9520 (in FA9520 mode)
The current FS settings are saved to events.
When connecting an FA-9520 (in FA-9500 mode) or FA-9500
The FA-9520 or FA-9500 settings are saved to events.
7-3. Data Loaded from Events
When connecting an FA-505(*), FA-1010 or FA-9520 (in FA9520 mode)
Event data is loaded to the current FS.
* In FA-505 Soft Version 2.00 and later, setting ranges of White Level and Black Level in
RGB Clip are different from those in other versions. Values will return to default settings if
they exceed the adjustable range due to loading events.
When connecting an FA-9520 (in FA-9500 mode) or FA-9500
Event data is loaded to the Main Unit.