FOR-A FA-10DCCRU, Operation Manual

Page: 82 / 300

66
5-10-4. VIDEO SUB
Black and white video and VITS signal settings.
V I D E O S U B 9 4
B L K / W H T
：
O F F
V I T S ： O F F
C O N V D L Y A D J : O F F
Parameter Default Setting range Description
BLK/WHT OFF OFF
ON
Turn ON for black and white video signals.
VITS OFF
OFF
ON
ON: Passes through VITS (V-ANC) lines 10
to 21 (NTSC), or 6 to 23 (PAL) of composite
input signals. For SD-SDI output signals,
inserts VITS lines into Y signals.
CONV DLY ADJ OFF
OFF
ON
Allows you to align unprocessed output
video signal phases to those of processed
video signals delayed by processing.
ON: Aligns CONV1 and 2 output video signal
phases and adjusts audio delay. See the
table below for the delay amounts.

Automatic Delay Adjustment by the CONV DLY ADJ function
If CONV1 is
set to:
If CONV2 is
set to:
CONV1
Output delay CONV2
Output delay
Audio output delay
(SDI/AES/Analog
audio channels)
BY-PASS BY-PASS 0 0 0
Other than
BY-PASS
BY-PASS
Delay
*1
produced
by conversion
Auto adjustment
*1
Auto adjustment
*1
BY-PASS
Other than
BY-PASS
Auto adjustment
*1
Delay
*1
produced
by conversion
Auto adjustment
*1
*1 The amount of delay varies depending on the input format. Progressive format signals
require 2 frames, and other format signals require 1 frame.
5-10-5. TEST SIGNAL
Internal test signal settings.
Video and audio signal processing will stop and a test signal will be output from all output
connectors.
T E S T S I G N A L 9 5
V I D E O : O F F
A U D I O : O F F
Parameter Default Setting range Description
VIDEO OFF
OFF
FULL CB
75 ％ CB
SMPTE CB
RAMP
Selects an internal video test signal.
AUDIO OFF
OFF
1KHzTONE
Selects an internal audio test signal
If VIDEO and AUDIO of the TEST SIGNAL menu are set to other than OFF:
button flashes.
Menu button
VIDEO SYS
AUDIO SYS
Menu button
VIDEO SYS
AUDIO SYS
VIDEO SYS
AUDIO SYS