FOR-A FA-10DCCRU, Operation Manual, Page: 253 / 300

237
14. REMOTE
14-1. REMOTE Connector
The pin assignments of the REMOTE (GPI) connector are as shown in the table below. The
connector has seven ports. Although the pin assignments below cannot be changed, the input
and output are selectable and the functions for GPI1 to GPI7 can also be selected.
 REMOTE (GPI) Pin Assignments (9pin D-sub, male, inch screws)
Pin No. Setting
1 DC OUT
(Up to 200mA output current is available at 5.4V.)
2 GPI 1 (input/output)
3 GPI 2 (input/output)
4 GPI 3 (input/output)
5 GPI 4 (input/output)
6 GPI 5 (input/output)
7 GPI 6 (input/output)
8 GPI 7 (input/output)
9 GND (ground)

See section 7-3. "GPI SETTING" for the function assignments for GPI1-GPI7.
For GPI inputs, the function is ON when a pin is shorted to ground and OFF when open.
14-2. GPI Input Circuit
PIN 9
PINs 2-8
FA-9500 inside