Foppapedretti UNIKO i-Size, Assembly Instructions Manual

Page: 29 / 120

• ENGLISH •
29
APPROVAL
CHECKS BEFORE USE
Compatible vehicles fitted with ISOFIX system
The UNIKO i-Size car seat is a device classified as “i-Size”, and is compatible with
the vehicles shown in the “Vehicle list”.
The vehicle list shows the vehicles and seats which are approved for using the
child restraint with the ISOFIX attachment and support leg.
If your vehicle is not in the vehicle list, contact the manufacturer for information
about compatibility of use before you buy the car seat.
The list is subject to continual revision with changes and additions of car models.
The updated list can be viewed on our website: https://www.foppapedretti.it/en/
Read the vehicle manual before installing the child restraint device. The manual
will indicate which seats are compatible for the “i-Size” approved child restraint.
3. WARNINGS
Do not install the UNIKO i-Size on passenger seats
in the vehicle which are rear- or side-facing. Do not use the
car seat on passenger seats with an active AIRBAG.
Read the instructions carefully before use and store them in
the special compartment for reuse in future. Failure to follow
the car seat installation instructions carefully could pose a risk
to your child.
DO NOT USE IF THE FRONT PASSENGER SEAT IS EQUIPPED WITH AN
ACTIVE FRONT AIRBAG
USING THE CAR SEAT