TMI-816
Wireless hand-held microphone transmitter
1.-
Grille
: protects the microphone capsule and helps to reduce noise from breathing and gusts of wind.
2.-
Display
: shows information on the tuned frequency, channel number, battery level, RF signal level and
audio signal level. If the battery level is low, the display lights up red.
3.-
Battery compartment lid
: unscrew this lid to access the battery compartment.
4.-
GAIN
: audio input sensitivity adjustment.
5.-
q
: hand-held microphone on/off switch.
6.-
Battery compartment
: use two 1.5 V type LR6-AA batteries, alkaline or rechargeable. When you insert
the batteries, make sure that the polarity is correct.
7.-
SET
: allows selection among the following configuration options: channel number and frequency, RF
transmission level (high/low), battery type selection (1.2 V - rechargeable/1.5 V - alkaline) to show the
battery level correctly and transmitter microphone lock. For this, press the SET button repeatedly and
use the
w
/
s
buttons to select the options.
8.-
w
/
s
: allows the menu options to be selected to set the wireless hand-held microphone.
9.-
Contacts for recharging the rechargeable batteries in the wireless microphone in the recharge docking
station mod.
MSC-2
.
Note
: when the SET button is pressed to configure the different microphone parameters, a MUTE indicator
appears on the display and the microphone does not transmit audio while the parameters are being
configured.
- 5 -
EN
