EN
- 6 -
STEREO MODE
Place the selectors located in the rear part of the amplifier in the STEREO position.
By doing so, the 4 channels will operate independently. Connect the 4 inputs and the 4 outputs of the
loudspeakers. The channel volume is adjusted separately.
BRIDGE MODE (BRIDGED)
Place the selectors located in the rear part of the amplifier in the BRIDGED position.
By doing so, the input for channels 1 and 2 will be the input signal for channel CH 1 and the input for the channels
3 and 4 will be the input signal for channel CH 3. The amplifier’s 4 channels are connected internally two by two
so that their power is combined in two outputs. connect the inputs of channels CH 1 and CH 3 and the
loudspeaker outputs BRIDGED. The volume is adjusted with the controls CH 1 and CH 3.
160129_FS-4256E_MANUAL_(EN)_Maquetación 1 1/2/16 8:29 Página 6
