EN
- 6 -
REMOTE CONTROL
1.-
q
: button to switch the player module on/off.
2.-
{
: in playback mode, rewinds playback quickly.
3.-
CH+/
12
: in playback mode, allows starting/pausing of playback.
In radio mode, allows selection of next preset radio station.
4.-
RECORD
: allows recording of aux input (AUX) in the USB storage
device or in the SD memory card.
5.-
CH-/EQ
: in playback mode, allows selection among the different
equalizations that exist.
In radio mode, allows selection of the previous preset station.
6.-
VOL+/-
: controls which allow the player’s volume to be
increased/decreased.
7.-
0-9
: number selection buttons.
8.-
MODE
: allows selection of audio source among USB storage device, SD
memory card, FM radio tuner or bluetooth receiver
9.-
}
: in playback mode, fast forwards playback.
10.-
REPLAY
: allows playback mode to be selected: repeat one track or
repeat all.
11.-
!
: activates/deactivates the audio output.
12.-
RPT DEL
: button which allows deactivation of track repetition mode.
13.-
SCAN
: allows FM stations to be automatically tuned.
BLUETOOTH RECEIVER
- This model
AS-123RUB
allows MP3 files contained in your mobile telephone to be played if the device is
paired to the amplifier’s bluetooth receiver module.
- To pair your mobile telephone to the bluetooth receiver, select the Bluetooth option with the MODE button
located on the front panel of the amplifier or on the remote control. With the bluetooth option activated in
your mobile telephone select the corresponding device from the list of bluetooth devices. At that moment,
your mobile telephone will be paired to the device.
- The playback options (playback, pause, previous/next track, etc) are available using the controls on the
amplifier itself or the remote control.
CONNECTION
- Make the connections with the amplifier and all the components of the installation switched off and
disconnected from the power supply.
- Connect the audio devices or required microphones to the corresponding inputs. Dynamic microphones
can be connected in the inputs designed for this purpose in the rear panel of the amplifier (MIC 1 and MIC 2).
- Line level sources can be connected in the inputs designed for this purpose in the rear panel of the
amplifier (LINE, CD/DVD and TV) or in the AUX input in the front panel.
- If required, the optical audio inputs located on the rear panel of the amplifier can be used.
- The amplifier is low impedance, which means that the loudspeakers must be connected in a series/parallel
circuit so that the load impedance of the loudspeakers is the same as the impedance of the amplifier
output and that the power supplied by the amplifier does not exceed that withstood by the loudspeakers:
60 + 60 W RMS, 8 Ω
- Powers the amplifier mod.
AS-123RUB
.
- Once the connections have been made according to your needs, connect the devices to the power supply
and switch them on. After use, do not forget to switch off and disconnect the device from the power
supply.
160620_AS-123RUB_MANUAL_(EN)_Maquetación 1 2/11/16 16:40 Página 6
