10
MyCrown Design
1.3
General information
Nominal line voltage ranges
MyCrown Design works in the following ranges:
Wireless phone interference with
medical electrical equipment
Replacing parts
Switch the device off and disconnect the power plug before replacing
parts.
The item numbers for ordering spare parts can be found in the spare parts
list.
The diagrams contained in the spare parts list provide a useful guide
when replacing parts.
Before replacing the boards, observe the ESD protective measures.
Disposal
Observe the information on disposal in the relevant operating
instructions.
Installation site
Observe the information on the installation site in the relevant operating
instructions.
Rated line voltage
100 - 250 VAC /50 - 60 Hz
Nominal current
3.0A to 2.0A
NOTICE
To ensure safe operation of medical electrical equipment, the use of
mobile wireless phones in practice or hospital environments is
prohibited.
WARNING
Potentially lethal shock hazard when working near the power supply unit
Disconnect from the line power supply.
Check for zero potential.
Summary of Contents for MyCrown Design
