FONA CDRelite System User Guide
B1057003 Rev. 3
23
5. Operation
5.1. Operating the System
5.1.1. Power On
1 .
Turn on the PC workstation used with imaging applications.
2 .
Connect the “B-type” end of the USB cable to the FONA
CDRelite Interface Module.
3 .
Connect the “A-type” end of the USB cable to the PC
workstation.
4 .
Connect the FONA CDRelite Sensor edge-card to the FONA
CDRelite Interface Module.
5 .
The amber LED on the USB side of FONA CDRelite USB
Interface Module blinks momentarily if CDR is running. The
green LED on the same side will also be illuminated.
6 .
The green LED on the Sensor side of the FONA CDRelite
USB Interface Module illuminates also and remains steady
on, indicating proper current condition for the Sensor.
7 .
Continue with Section 5.2 for step-by-step instructions on
acquiring X-ray images with CDR DICOM software. For
other imaging software, please refer to those instructions
instead.
5.1.2. Power Off
1 .
Disconnect the USB cable from either the FONA CDRelite
USB Interface Module or the PC workstation.
2 .
Power is removed from the FONA CDRelite USB Interface
Module and Sensor, and the green LED on the Sensor side of
the FONA CDRelite USB Interface Module is turned off.
