Transmitter
Receiver
Individual Strobe on/off button
TEST Button
Sync Channel
Battery Cover
All Strobes ON
All Strobes OFF
Strobe Light Volume Control Button
2.5mm Sync Port
Part Reference
Transmitter Set up
Receiver Set up
Model
RX-FREE 7s
Sync Speed
1/250 sec
Frequency
2.4GHz
Battery Transmitter
1xAA 1.5V
Channels
16
Receiver
AC 100V-220V
Max range
Up to 30 meters
POWER ON/OFF & WIRELESS FLASH TRIGGER
Sync Channel
Power Button
AC 100V-200V
Status LED
Strobe Light Volume Cord
Connector to strobe
Mini Female Cable
Strobe Channel Button
Install a AA 1.5V battery into the transmitter.
Slide the transmitter into the hot shoe of your camera and tighten the lock wheel.
Use the included 2.5mm sync cord to connect the transmitter to a PC sync port of your camera.
Unplug the AC power cord from the studio strobe and plug it into the RX-Free 7s receiver.
Insert the power cord of the receiver into the AC power port of the strobe.
Plug provided 3.5mm sync cord to the receiver.
Insert connected 3.5mm sync cord to mini male cable, then to the sync port of strobe.
(If 6.3mm sync port used for your strobe, connect using jack converter provided.)
Connect mini female cable of the receiver to the mini jack port on the bottom of the strobe.
1
2
3
4
5
1
1
3
4
5
2
※
Follow the procedure
①
>
②
>
⑤
or
①
>
②
>
③
>
④
depending on strobe specification.
※
Choose either 2-1 or 2-2 process depending on the type of camera.
1
2-1
2-2
2-1
2-2
3.5mm Sync Cord
Mini male Cable
3.5mm socket
to 6.33mm
Jack Converter
