Controls
1)
Connect the power cable into power grid
2)
Put the receiver into flash head socket
3)
Turn the light on
4)
Set up the light intensity and other function by instructions below
Modeling lamp / flash settings
Intensity adjustment by 0,1 or 0,5 steps
Proportional adjustment of modeling lamp and flash a tone (on / off)
Light sensitive sensor activation (slave mode)
Flash is charged and ready - sound signal (on / off)
Flash test
Summary of Contents for Digitalis Pro 200S
Page 1: ...Studio flash Digitalis Pro 200 400 600 S ...
Page 6: ......
