Foma SA702i, Manual, Page: 47 / 451

45
Ch
a
rg
ing FO
MA te
rmi
n
a
l
Befo
re
us
in
g
S
A70
2
i
1
Open the cover of the external connection port of FOMA
terminal.
2
Insert the connector of AC adapter or DC adapter with the
arrow mark on top into the external connection port of FOMA
terminal.
・
Insert horizontally until it clicks.
3
Unfold the power plug of AC adapter and insert it into AC outlet.
When using DC adapter, insert the plug into Cigarette lighter
socket of a car.
Charging starts with a sound and the charging lamp lights up.
4
Remove the charger plug of AC adapter from AC outlet after
completing charge.
When using DC adapter, remove the plug from Cigarette lighter
socket.
5
Be sure to press the release buttons and pull out the connecter
horizontally, to remove the connecter from FOMA terminal.
・
Do not force to pull, or it may be damaged.
6
Close the cover of the external connection port of FOMA
terminal.
Information
● Red lamp lights up while charging. The lamp is turned off after completing charge.
● Charge lamp may not light up immediately after the start of charging. If the lamp does not light up after a
while, disconnect FOMA terminal from AC adapter (or desktop holder) or DC adapter then reconnect to
start charging.
● FOMA terminal, battery pack and AC adapter may become warm while charging but it is not a defect.
● Connect AC adapter to AC 100V outlet.
● Do not use DC adapter when the vehicle's engine is not running. It may cause the car battery to be
discharged.
● Remove/insert the connector slowly and firmly to the right direction at the right angle, not to apply
excessive force. Forcing to remove/insert may cause damage on the external connection port.
● The fuse (2A) of the DC adapter is a consumable part. Contact the nearest automotive supply stores for
replacements.
● Always use DC adapter in a negative-ground vehicle. Never use it in a positive-ground vehicle.
● Data saved/registered in FOMA terminal remains about 1 month with the battery pack removed or battery
empty. The data may be lost after a longer time elapsed. For data may be lost due to other handling of
FOMA terminal such as failure or repair, it is recommended to maintain a separate record of the data
registered in your FOMA terminal. In case that saved or registered data has been lost, DoCoMo assumes
no responsibility for the loss of any data.