Foma SA702i, Manual, Page: 266 / 451

264
No
tif
y l
o
c
a
ti
on
GP
S
f
u
nc
ti
on
Notifying location information
Notify present location information to the selected
service client.
1
Press
s
s s
1
.
2
Select the client and press
C
.
blinks and positioning starts.
■ Entering service clients to notify
a
Select "Direct input" and press
C
.
b
Enter the service client ID and press
C
.
■ Canceling Notify location
a
Press
m
[Cancel] or
c
.
・ Location information may be sent
depending on the operation timing.
・ Under the poor radio wave condition, sent
Location information may not reach GPS
service provider.
<1-touch notify>
Notifying the present location easily
Notify location information with easy operation by
setting the service client.
・
Set 1-touch notify to use the function.
1
Hold down
a
for over a second.
After completing Position location, location
information is notified to the service client
which is registered as 1-touch notify.
Setting 1-touch notify client
Register service clients to notify with 1-touch notify.
・
1-touch notify setting is released when deleting
the set service client.
1
Select the service client on Location
service client list screen, and press
p
[Function]
s
2
"1-touch notify".
・
Press
2
"Reset 1-touch" to release the
setting.
Notifying the present location
periodically
Set periodical notification to notify at the certain set
time.
・ Up to 2 schedules can be registered.
・
Actions when setting Periodic notify
J
P270
1
Press
s
s s
2
s
3
.
2
Press
1
"Schedule 1" or
2
"Schedule 2".
・
Valid/Invalid is displayed for each schedule.
3
Enter the terminal security code and
press
C
.
4
Press
1
"Valid".
■ Canceling the setting
a
Press
2
"Invalid".
・ Previous schedule setting remains even
after changing the setting to "Invalid".
5
Set each item.
■ Setting Service clients
a
Select and press
C
.
b
Select a service client, and press
C
s
C
.
・ Set Location service client in advance.
J
P263
■ Setting start time
a
Select and press
C
.
b
Enter the start time, and press
C
.
■ Setting end time
・ The setting is not available when Notification
interval is set to "Once only".
a
Select and press
C
.
b
Enter the end time, and press
C
.
■ Setting Notification interval
a
Select and press
C
.
b
Press
1
"Notification interval" or
2
"Once only".
Ｎｏｔｉｆｙ ｌｏｃａｔｉｏｎ
Ｐｏｓｉｔｉｏｎｉｎｇ ｌｏｃａｔｉｏｎ
ＫＡＫＥＴＳＵＫＥ Ｓｅｒｖｉｃｅ
Ａｃｃｕｒａｃｙ：
Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ
ｔｏ ｃａｎｃｅｌ
ｔｏ ｃａｎｃｅｌ
Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ
ｔｏ ｃａｎｃｅｌ
Ｃａｎｃｅｌ
Notification
interval Notifies the location for each
preset time between the start
time and the end time.
a
Enter the interval and
press
C
.
・
Unable to set the time less
than 5 minutes.
Once only Notifies the location at the
preset time for starting.